Frequently Asked Questions; Technical Faults - Miele G 4281 Operating Instructions Manual

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Problem
The dishwasher will
not start.
The dishwasher
stops during a
program.
The buzzer sounds.
All the indicator
lights of the
program selection
flash when the door
is open.
The time display
shows fault FXX.
In addition, the drain
pump may run even
when the door is
open.

Frequently Asked Questions

Possible fault
The door is not properly
closed.
The dishwasher is not
plugged in.
The circuit breaker has
tripped.
The dishwasher is not
turned on.
The circuit breaker has
tripped.
There may be a
technical fault.
Fault F70:
The waterproof system
reports a fault.
Solution
Push the door firmly closed.
Insert the plug.
– Reset the circuit breaker
(see data plate for the
correct fuse rating).
– If the circuit breaker trips
again, contact Miele.
Press the K button and select
a program.
– Reset the circuit breaker
(see data plate for the
correct fuse rating).
– If the circuit breaker trips
again, contact Miele.
Press the K button to turn the
dishwasher off.
After a few seconds:
– Turn the dishwasher on.
– Use the Program button to
select the desired program.
– Close the door.
If the indicator lights flash
again, there is a technical fault.
– Contact Miele,
– Close the water supply.
– Contact Miele.
37