To Remove The Center Head Restraint; To Reinstall The Center Head Restraint; Seat-Mounted Cup Holders And Armrest Storage Compartment - Lincoln MKZ Hybrid Owner's Manual

Seating and Safety Restraints
To remove the center head restraint, do the following:
1. Pull up the head restraint until it reaches the highest adjustment
position.
2. Insert and push a tool, such as a large paper clip, into the pin hole
located on the side of the guide sleeve and press the adjust/release
button, then pull the head restraint upward.
3. Store the head restraint in a secure location, such as the trunk of the
vehicle.
To reinstall the center head restraint, do the following:
1. Insert the two stems into the guide sleeve collars.
2. Push the head restraint down until it locks.
Properly adjust the head restraint so that the top of the head restraint is
even with the top of your head and positioned as close as possible to the
back of your head. For occupants of extremely tall stature, adjust the
head restraint to its full up position.
WARNING: To minimize the risk of neck injury in the event of a
crash, head restraints must be installed properly.

Seat-mounted cup holders and armrest storage compartment

To access the cup holders, fold the
armrest down.
WARNING: Use only soft cups in the cup holder. Hard objects
can injure you in a collision.
144
2012 MKZ Hybrid (hkz)
Owners Guide, 1st Printing
USA (fus)