Table of Contents
Advertisement
KH1190_Elek_Gebaeckpress_UK
KH1190
4. Place the other end of the threaded
rod
in the motor unit
that the pins in the inside of the
motor unit
engage with the guide
rails in the threaded rod
5. Push the threaded rod
pusher
into the motor unit
the stop. The elevations on the trans-
mission disc
recesses on the rear of the pusher
The arrows in the motor unit
on the pusher
each other .
Assembling the container
6. Place the container
unit
so that the arrow on the con-
tainer
points at the opened lock
on the motor unit
Note: This is only possible if the pusher
is correctly assembled. If the con-
tainer
does not fit onto the motor
unit
, repeat steps 1 to 5.
7. Turn the container
arrow points to the closed lock
the motor unit
is heard.
Assembling motif discs
When the pusher
are assembled:
1. Select the desired motif disc
2. Place the motif disc
ring
with the inscribed side to
the bottom.
3. Place the closing ring
disc
on the container
4. Turn the closing ring
tion of the arrow until it engages
14.06.2006
. Ensure
.
with the
to
must engage with the
.
and
must point towards
on the motor
.
so far until the
on
and an audible click
and container
.
in the closing
with the motif
.
in the direc-
.
11:08 Uhr
Seite 6
Assembling the nozzles
When the pusher
are assembled:
1. Select a nozzle
2. Place the nozzle
adapter
.
3. Screw the adapter closure
nozzle
on the nozzle adapter
4. Place the nozzle adapter
closing ring
. The nozzle must po-
int outwards.
5. Place the closing ring
nozzle adapter
6. Turn the closing ring
tion of the arrow until it engages
Filling the container
Do not place the pastry to be proces-
sed in the refrigerator. There it will
become too firm. The pastry must
have a room temperature.
1. Turn the container
row points to the opened lock
2. Remove the container
motor unit
. Leave the pusher
and the threaded rod
unit
.
Tip: If need be, moisten the internal
surfaces of the container
water before filling it with pastry.
Doing so helps avoid having the pastry
stick to the inner surfaces of the
container
.
3. Shape the pastry / decorating mixture
to a roll. This permits easier filling.
Fill the container
roll.
- 6 -
and container
.
on the nozzle
over the
.
in the
with the
on the container
.
in the direc-
.
so that the ar-
.
from the
in the motor
with
with this pastry
Advertisement
Table of Contents
