Setting Up the Projector
26
Connecting an RGB Signal Source
Follow these instructions to connect the projector to a device that has
an RGB signal output port using the VGA computer cable that came
with the projector.
Before starting, make sure the projector and your image source are
turned off.
1. Connect one end of the VGA computer cable to the projector's
(PowerLite 260d), or
Computer
(PowerLite 280d) port.
PowerLite 260d
PowerLite 280d
2. Connect the other end to the output port on your device.
3. To play sound through the projector, follow the instructions
beginning on page 28.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 31 for instructions.
If more than one device is connected to the projector, select
(PowerLite 260d), or
Computer
(PowerLite 280d) as the source by pressing the
button on the projector or remote control. See page 33.
or
Computer1
Computer2
Connect VGA
computer cable
or
Computer1
Computer 2
Source Search