Epson PowerLite 260D User Manual page 63

Sleep Mode Time:
period of time before the projector turns off automatically,
from 1 to 30 minutes.
High Altitude Mode:
altitude above 1,500 m (4,900 feet), turn this setting on to
ensure that the internal temperature of the projector is
regulated properly. Turn this setting off for lower elevations.
■
Standby Mode
Select
Network On
over a network when the projector is in standby mode (the
power light is orange).
■
Air Filter Setting
Turn on the
Clean Notice
display a message if its air filter becomes clogged with dust or
dirt. Select how soon you want to receive the Clean Notice
display as the
is best. See page 73 to clean or replace the air filter.
■ Language
Select the language to be used for the projector menus.
4. When you're finished, press
When Sleep Mode is on, you can set the
When using the projector at an
(PowerLite 280d only)
to allow the projector to be monitored
setting to have the projector
Clean Notice Timing
or
Esc Menu
setting;
Level 1 (Early)
.
Fine-tuning the Projector
63