Connecting An Rgb Video Source - Epson PowerLite 7850p User Manual

note
Be sure your video player is
not a component video
source. If you set the wrong
source, image quality may
suffer. Check your video
player's documentation.
Connecting to Computers, Cameras, and Other Equipment
62

Connecting an RGB Video Source

Follow these instructions to connect the projector to a video player
that has an RGB video output port. Depending on the type of
connector on your player, you'll need to use the appropriate cable:
■ If your player has a single VGA-style connector, see below.
If your player has three connectors labeled R/G/B, see
■
"Connecting Using a BNC-style Cable" on page 63.
Connecting Using a VGA-style Computer Cable
1. Locate the VGA computer cable provided with the projector.
2. Connect the cable between the video port on your player and the
port on the projector.
Computer
3. If you want to play sound through the projector, see page 65 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 1
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to:
■ Enter the projector's Setting menu, then change the
Computer Input setting to
■ After exiting the menu system, press the remote control's
button or the projector's
Comp
repeatedly to select the image source. (
should appear on the screen.)
Video)
(see page 133).
RGB-Video
button
Computer/DVI
Computer (RGB