The Cubasis Demo Song Screen - E-Mu 404 Owner's Manual

The Cubasis Demo Song Screen

Inspector Button
VST Inputs Pane
Transport Bar
Set up your Inputs to Record
Open the VST Inputs from the Panels menu. Notice that all the Sends from
14.
PatchMix DSP are listed here. The green buttons are used to turn these inputs into
Cubasis on and off. Turn all the inputs on if they aren't already on.
Click the Input Meter buttons on all the VST Channel Mixer strips, illuminating
15.
them. This turns the meters on so you can verify that you're getting an input signal.
Make sure your input channels are getting into Cubasis by examining the VST
16.
Channel Mixer 1. You should see the all meters move when you play your
instrument. If not, first check the input meter on PatchMix DSP. If you still don't see
meter activity, refer to the
change the input on a Cubasis input mixer strip, hold Ctrl and click the top button
in the strip.
Click the Monitor Enable button to hear the return from Cubasis. You should see
17.
activity on the Cubasis Master strip when you play your instrument.
Turn Record Enable On for each track you want to record. See the screen above
18.
Select the Track that you want to record by clicking on it in the arrange window. The
19.
rack darkens to indicate that it is selected. See the "Cubasis Demo Song Screen"
above.
E-MU Digital Audio System
Input Meter
Button
Return-to-Zero
"ASIO Recording Checklist - Cubasis" on page 58.
Arrange Window
Selected Track
Record Enable
Monitor Enable
VST Channel Mixer 1
6 - Working with ASIO
Basic Recording
f Hidden Feature:
Open the Track Info
section by clicking the
Inspector button in
Cubasis. See above.
To
57