3-Band Eq - E-Mu 404 Owner's Manual

Digital audio system
Hide thumbs Also See for 404:
Table of Contents

Advertisement

5 - Effects
Core Effects Descriptions

3-Band EQ

This versatile equalizer provides two shelving filters at the high and low ends of the
frequency range and a fully parametric band in the center. Up to ±24 dB of boost or cut
is provided for each band.
Note: The Wet/Dry Mix control on an equalizer should normally be set to 100% wet or
unpredictable results may occur.
Low Shelf
Corner
Freq.
+24dB
+
-
-24dB
Setting up a Parametric EQ
Turn up the gain on the band you are working with. This allows you to easily hear
1.
the effect of the filter.
Reduce the bandwidth if you are working with a mid-band.
2.
Now adjust the Center Frequency to "zero-in" on the frequencies you wish to boost
3.
or cut.
Set the Gain to a positive value to boost frequencies or to a negative value to cut out
4.
frequencies.
Widen the Bandwidth to create a more natural sound.
5.
Adjust and tweak as needed.
6.
Parameter
Description
High Shelf Gain
Sets the amount of cut (-) or boost (+) of the high frequency shelf.
High Corner Freq. Sets the frequency where the signal begins getting cut or boosted
with the High Gain control.
Mid Gain
Sets the amount of cut (-) or boost (+) of the mid frequency band.
Mid Center Freq.
Sets the range of frequencies to be cut or boosted with the Mid
Gain control.
Mid Bandwidth
Sets the width of the frequency range for the Mid Center
Frequency band that will be cut or boosted by the Mid Gain
control.
Low Shelf Gain
Sets the amount of cut (-) or boost (+) of the low frequency shelf.
Low Corner Freq. Sets the frequency where the signal begins getting cut or boosted
with the Low Gain control.
38
Mid Band
High Shelf
Corner
Freq.
Width
Center
Frequency
Creative Professional

Advertisement

Table of Contents
loading

Table of Contents