Input Mixer Strips; Input Type - E-Mu 404 Owner's Manual

Digital audio system
Hide thumbs Also See for 404:
Table of Contents

Advertisement

Input Mixer Strips

PatchMix DSP Line Input Mixer Strips are mono. The WAVE and S/PDIF strips are stereo.
Each input mixer strip can be divided into four basic sections.
• Insert Section
Effects, EQ, External Sends and Returns can be inserted into the signal path.
• Pan Controls
This control positions the signal in the stereo sound field.
• Aux Sends
Used to send the signal to sidechain effects or to create separate mixes.
• Volume Control Controls the output level of the channel.
This screen shows a mono strip on the left and a
stereo strip on the right.
E-MU Digital Audio System

Input Type

Mono/Stereo
The very top of the strip is labeled
mono or stereo and displays the type
of the assigned input. Input mixer
Input Type
strips can be added as desired and can
be configured to input the following:
• Physical input
(Analog/SPDIF)
• Host Input
(Direct Sound, WAV, ASIO source)
Insert Section
Inserts
You can drag and drop effects from the
Effects Palette or Right-click to insert a
Physical or ASIO Send or Send/Return
A Peak Meter, Trim Control or Test
Signal can also be inserted by Right-
Pan Controls
clicking.
Pan Controls
These controls allow to you position
the channel in the stereo sound field.
Aux Sends
Dual controls on stereo strips allow
you to position each side indepen-
dently.
Channel
Aux Sends
Volume
These controls send the signal to
Control
sidechain effect processors such as
reverb and delay. They can also be used
to create separate mixes for the artist or
for recording.
Mute/Solo
Volume Control
Buttons
Controls the output level of the strip
into the main/monitor mix bus.
Scribble Strip
Mute/Solo Buttons
These convenient buttons allow you to
solo or mute selected channels.
Scribble Strips
Click inside the scribble strip and type
a name of up to eight characters.
4 - The PatchMix DSP Mixer
Input Mixer Strips
The Input Type will
f
turn RED if the input is not
available.
Host input strips are
f
shown with WHITE text.
Physical input strips are
shown with BLUE text.
15

Advertisement

Table of Contents
loading

Table of Contents