Install The Sync Card - E-Mu 404 Owner's Manual

Do not force the E-MU 0404 card into the slot. Make sure that the gold finger
6.
connector of the card is aligned with the PCI bus connector on the motherboard
before you insert the card into the PCI slot. If it doesn't fit properly, gently remove it
and try again.
Secure the card into the slot using one of the screws you placed aside earlier.
7.
Attach the Analog and Digital breakout cables to the rear of the 0404 card.
8.
Connect your audio cables to the breakout cables.
9.

Install the Sync Card

Unwrap the Sync Card if you have one and get ready to install it.
1.
Connect the ribbon cable provided with the kit between the E-MU 0404 card and
2.
the Sync Daughter Card as shown in figure 3. The cable is keyed so it cannot be
incorrectly inserted. Seat the connectors firmly in the sockets and arrange the cable
neatly.
Align the Sync Card with the slot and press gently but firmly down into the slot as
3.
shown in figure 2 on the preceding page.
Do not force the Sync Card into the slot. Make sure that the gold finger connector of
4.
the card is aligned with the PCI bus connector on the motherboard before you
insert the card into the PCI slot. If it doesn't fit properly, gently remove it and try
again.
Secure the card into the slot using one of the screws you placed aside earlier.
5.
Figure 3
Sync Daughter
Card
E-MU Digital Audio System
2 - Installation
Install the Sync Card
3