Mixer Strip Creation - E-Mu 404 Owner's Manual

4 - The PatchMix DSP Mixer

Mixer Strip Creation

Mixer Strip Creation
PatchMix DSP is a dynamically configurable mixer. Each mixer session can contain an
arbitrary number of strips up to a limit set by the number of available input sources and
available DSP resources.
To Add a New Strip:
Click on the New Mixer Strip button.
1.
The Assign Mixer Strip Input Dialog appears:
2.
Select the desired input to the mixer strip from the following choices:
3.
• Physical Source:
• Host - ASIO Source input
• Host - Direct Sound input
Mixer Strip Type
Physical: PCI Card Analog 24-bit monophonic analog input.
Physical: PCI Card S/PDIF 2 channel digital audio from the S/PDIF input.
Host: WAVE L & R
Host: From ASIO Out
Select Pre-Fader Aux Sends or leave the box unchecked for Post-Fader Aux Sends.
4.
Click OK to create a new strip or Cancel to cancel the operation.
5.
To Delete a Mixer Strip:
Click the top of the mixer strip you wish to delete. A red border appears around the
1.
strip, indicating that it is selected.
Click on the Delete Mixer Strip button.
2.
16
See Overview of the Mixer
Stereo analog or digital card input (Analog or S/PDIF)
Streaming audio from a software application.
Window sound sources—WAVE, Direct Sound, WDM, CD
Function
Direct Sound, WDM, Windows Media (Sound generated or
handled by Windows, such as game sound, CD player, beep
sounds, etc.).
2 channel digital audio from an ASIO source (software application).
See Overview of the Mixer
f See "Pre or Post Fader
Aux Sends" on page 24.
Creative Professional