6) Rinse FS assembly thoroughly with clean water and replace in its correct position.
7) Replace the upper rear panel in its correct position.
8) Plug the appliance into the electrical outlet, then move the control switch to the "ICE"
position to start the automatic icemaking process.
Legend: FS–float switch; LFS–lower float switch; UFS–upper float switch
Float Switch Assembly
Reservoir Cover
Reservoir
Red (R)
(upper float switch)
Black (BK)
(common)
Blue (BU)
(lower float switch)
Magnet (towards top)
Upper Float (blue)
Magnet (towards top)
Lower Float (white)
Spring Retainer Clip
Plastic Retainer Clip
16
Fig. 1
Fig. 2