Cruise Control; Principle Of Operation; Using Cruise Control - Lincoln MKZ Hybrid Owner's Manual

PRINCIPLE OF OPERATION

Cruise control lets you maintain a set
speed without keeping your foot on
the accelerator pedal.

USING CRUISE CONTROL

WARNINGS
Do not use cruise control in
heavy traffic, on winding roads
or when the road surface is slippery.
When you are going downhill,
your speed may increase above
the set speed. The system will not
apply the brakes. Change down a gear
to assist the system in maintaining the
set speed.
Note: Cruise control will disengage if
the vehicle speed decreases more than
10 mph (16 km/h) below your set
speed while driving uphill.
E145976
The cruise controls are located on the
steering wheel.
Switching Cruise Control On
Press and release ON.

Cruise Control

E71340
Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+.
3. Take your foot off the accelerator
The indicator will change colors in the
instrument cluster.
Changing the Set Speed
Note: If you accelerate by pressing the
accelerator pedal, the set speed will
not change. When you release the
accelerator pedal, you will return to the
speed that you previously set.
•
•
•
Canceling the Set Speed
Press CNCL or tap the brake pedal.
You will not erase the set speed.
Resuming the Set Speed
Press and release RES.
208
The indicator will appear in
the instrument cluster.
pedal.
Press and hold SET+ or SET-.
Release the control when you
reach the desired speed.
Press and release SET+ or SET-.
The set speed will change in
approximately 1 mph (2 km/h)
increments.
Press the accelerator or brake
pedal until you reach the desired
speed. Press and release SET+.