Table of Contents
Advertisement
Connect a USB Storage Device to the Router
ReadySHARE lets you access and share or a USB drive connected the router USB port. If
your USB device has special drivers, it is not compatible.
To connect a USB storage device:
1.
Insert your USB storage device into the USB port on the rear panel of the router.
2.
If your USB device has a power supply, you must use it when you connect the USB device
to the router.
It might take up to 2 minutes before the USB device is ready for sharing.
Safely Remove a USB Drive
If you want to physically disconnect a USB drive from the router USB port, first, log in to the
router, and then safely remove the USB device.
To remove a USB drive safely:
1.
Select USB Storage > Basic Settings.
2.
Click the Safely Remove USB Device button.
This takes the drive offline.
3.
Physically disconnect the USB drive.
Access the USB Storage Device
When you connect the USB device to the router USB port, it might take up to two minutes
before it is ready for sharing. By default, the USB storage device is available to all computers
on your local area network (LAN).
To access the USB device from a Mac:
1.
Select Go > Connect to Server.
2.
Enter smb://readyshare as the server address.
3.
Click the Connect button.
R6200v2 Smart WiFi Router
USB Storage
46
Hide quick links:
Advertisement
Table of Contents
