Table of Contents
Advertisement
Basic Wireless Settings
The Wireless Settings screen lets you view or configure the wireless network setup.
The router comes with preset security. This means that the Wi-Fi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the unit.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
NETGEAR recommends that you do not change your preset security
your preset security settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click the Apply button. To avoid this
problem, use a computer with a wired connection to access the router.
To view or change basic wireless settings:
1.
Select BASIC > Wireless.
The screen sections, settings, and procedures are explained in the following sections.
2.
Change the settings as needed.
3.
Click the Apply button.
Your settings are saved.
If you were connected wirelessly to the router and you changed the SSID or wireless
security, you are disconnected from the network.
R6200v2 Smart WiFi Router
Basic Settings
25
settings.
If you change
Hide quick links:
Advertisement
Table of Contents
