Change The Wireless Security Option - NETGEAR R6200v2 User Manual

• Security Options. The router comes with unique preset wireless security. These settings
are on the product label. NETGEAR recommends that you use preset security so that you
can refer to the label if you forget the WiFi password. However, you can change the
security option and passphrase.
A security option is the type of security protocol applied to your wireless network. The
security protocol in force encrypts data transmissions and ensures that only trusted devices
receive authorization to connect to your network. Wi-Fi Protected Access (WPA) has several
options including pre-shared key (PSK) encryption.
WPA encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means
that the Wi-Fi Alliance (http://www.wi-fi.org/) authorized the product because it complies with
the worldwide single standard for high-speed wireless local area networking.
WPA uses a passphrase for authentication and to generate the initial data encryption keys.
Then it dynamically varies the encryption key. WPA-PSK uses Temporal Key Integrity
Protocol (TKIP) data encryption, implements most of the IEEE 802.11i standard, and works
with all wireless network interface cards, but not all wireless access points.
WPA2-PSK is stronger than WPA-PSK. It is advertised to be theoretically indecipherable due
to the greater degree of randomness in encryption keys that it generates. WPA2-PSK gets
higher speed because it is implemented through hardware, while WPA-PSK is implemented
through software. WPA2-PSK uses a passphrase to authenticate and generate the initial data
encryption keys. Then it dynamically varies the encryption key.
WPS-PSK + WPA2-PSK mixed mode can provide broader support for all wireless clients.
WPA2-PSK clients get higher speed and security, and WPA-PSK clients get decent speed
and security. For help with WPA settings on your wireless computer or device, see the
instructions that came with your product.

Change the Wireless Security Option

Your router is preset with unique wireless security settings. You can change the settings if
you want. NETGEAR recommends that you do not disable security.

To change the WPA settings:
1. Select BASIC > Wireless Settings.
2. Under Security Options, select the WPA option you want.
3. In the Passphrase field that displays when you select a WPA security option, enter the
network key (password) that you want to use. It is a text string from 8 to 63 characters.
4. Write down the new password and keep it in a secure place for future reference.
5. Click the Apply button.
Your changes are saved.
R6200v2 Smart WiFi Router
Basic Settings
27