Wireless Ap - NETGEAR N750 User Manual

Wireless AP

You can set up the router to run as an access point (AP) on the same local network as
another router.
To set up the router as an AP:

1. Select Advanced > Advanced Setup > Wireless AP.
2. Select the Enable Access Point Mode check box.
3. Scroll down to view the bottom half of the screen to display more instructions.
4. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other
router.
5. Select the check box for the IP address setting that you want to use:
• Get an IP address dynamically from the other router. The other router on the
network assigns an IP address to this router while this router is in AP mode.
• Fixed IP address (not recommended). Use this setting if you want to manually
assign a specific IP address to this router while it is in AP mode. Using this option
effectively requires advanced network experience.
6. Click Apply.
N750 Wireless Dual Band Gigabit Router WNDR4300
Advanced Settings
89