Wireless Settings Screen Fields - NETGEAR N750 User Manual

N750 Wireless Dual Band Gigabit Router WNDR4300
1. Select Basic > Wireless to display the Wireless Settings screen.
The screen sections, settings, and procedures are explained in the following sections.
2. Make any changes that are needed and click Apply to save your settings.
3. Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
• Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
• Does your wireless device or computer show up on the Attached Devices screen? If it
does, it is connected to the network.
• If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your router.

Wireless Settings Screen Fields

Region Selection
The location where the router is used. Select from the countries in the list. In the United
States, the region is fixed to United States and is not changeable.
Wireless Network (2.4 GHz b/g/n and 5 GHz)
The b/g/n notation references the 802.11 standards of conformance for the 2.4 GHz radio
frequency.
NETGEAR genie Basic Settings
29