Ipv6 - NETGEAR N750 User Manual
N750 wireless dual band gigabit router
Hide thumbs
Also See for N750:
- User manual (104 pages) ,
- Configuration manual (3 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
To turn on Universal Plug and Play:
1.
Select Advanced > Advanced Setup > UPnP. The UPnP screen displays.
2.
Select the setting that you want to use.
3.
Click Apply to save your settings.
IPv6
You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
To set up an IPv6 Internet connection type:
1.
Select Advanced > Advanced Setup > IPv6 to display the following screen:
2.
Select the IPv6 connection type from the list. Your Internet service provider (ISP) can
provide this information.
•
If your ISP did not provide details, you can select IPv6 Tunnel.
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
•
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select
Auto Config.
•
For more detailed information about Internet connection types, see the following
sections.
3.
Click Apply so that your changes take effect.
N750 Wireless Dual Band Gigabit Router WNDR4300
Advanced Settings
107
Hide quick links:
Advertisement
Table of Contents
