Router Or Lan Connection - EverFocus ECOR 264-8/4 F2 User Manual

 Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from the internet
service provider.
 Note: If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect
the network settings. Therefore, it can use a dynamic IP address.
 Exit from the DVR's Menu to save the settings.
 To access the DVR from a computer, open Internet Explorer and in the address bar type:
http:// (IP address given by your internet service provider)
 Note: When using this type of connection, only one device can be connected to the modem at
a time. You will need to use a computer at a different location to test the connection.
5.9 R
OUTER OR
Internet
Straight Through
Straight Through Ethernet Cable Pin outs:
LAN C
ONNECTION
Cat 5
Cable
Hi-speed Modem
DVR
91
Router