Network Connection; Direct Pc Connection Through Crossover Network Cable; Network Connection Through Patch Cable - EverFocus ECOR 264-8/4 F2 User Manual

1.10 N
ETWORK CONNECTION
This section only describes physical connection to an Ethernet network. This step must be completed
before the DVR can connect to the network. There are two basic types of connection:

1.10.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of
connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a
10/100 Mbps compatible network connection.
Figure 1-3 Direct PC Connection
Pinout of crossover-cable

1.10.2 Network Connection through Patch Cable

The connection to an existing network requires a normal patch cable (straight-through). The illustration
shows the connection to a network switch or router.
13