Table of Contents
Advertisement
Answering System Setup & Programming
Audible Quick Setup Guide
If you need additional assistance; while in standby mode, press the ans. menu button
on the base and follow the voice instructions.
Set Answering System ON/OFF
Upon initial power up and activation, the answering system is in the ON mode.
1. Press the ans. menu button. The system announces "Answerer ON (or OFF)",
4
| skip or|
press the
NOTE: When the system is in OFF mode; the indicator displays OFF.
. Press the ans. menu button to confirm your setting.
Day/Time
The day/time code on the answering system is independent of the date/time shown
on the base display. You must program the answering system's day/time in order to
have an accurate time for message receipt.
1. Press the ans. menu button repeatedly until the system announces day and time.
4
| skip or|
. Press the
message indicator displays 'd' and a number, 1 to 7,representing the day of the
week (1 represents Monday; represents Tuesday, etc.). Press the ans. menu
button to confirm.
4
| skip or|
3. Press the
am or pm correctly.
4. Press the ans. menu button to confirm.
4
| skip or|
5. Press the
digit, the selection is 0 through 5, as the minutes range from 00 to 59. Press the
ans. menu button. Next program the second digit, the choices are 0 through 9.
6. Press the ans. menu button to confirm.
NOTE: If the main power to the base is lost, the message indicator
displays St. (Set time) to remind you adjust the clock when power is
restored.
34
3
repeat button to switch between ON and OFF.
3
repeat button to program the Day. As you program, the
3
repeat button to program the Hour. Remember to program
3
repeat button to program the Minutes. To program the first
Advertisement
Table of Contents
