Filling With Oil - Dürkopp Adler 767 Installation Instructions Manual

5. Filling with oil

(until July 2003)
Top up the oil reservoir only with DA-10 oil or an equivalent oil with the following
specification:
–
Viscosity at 40° C :
–
Flash point:
DA-10 can be obtained from DÜRKOPP ADLER AG sales outlets
(see operating manual, page 27).
–
Remove oil-filling screw 1 and pour in oil.
–
Check oil level at sight glass 2.
The oil level must be between "FULL" and "EMPTY".
–
Replace oil-filling screw 1.
Clean up any oil overflow.
1
2
1
2
10 mm /s
150 °C
(from August 2003)
GB
11