Umber; Umber Efore Ialing - GE 28128 Series User Manual

d cId n
IalIng a
1. Make sure the phone is off (not in TALK mode).
. Press the button.
. Press the View (SKL) button.
4. Use the or
5. Press the TALK, SPKR, or Cell (SKR) button. The number dials automatically.
f
ormattIng a
NoTE: Depending on (a) how the incoming caller's phone number is
formatted when it is received, and (b) whether or not you previously
pre-programmed your local area code into the PHoNE SETTING
menu, you may need to adjust the format of the incoming caller's
stored phone number before calling back the record.
If the number does not dial as shown, follow steps below to format it:
1. Make sure the phone is off (not in talk mode).
. Press the button.
. Press the View (SKL) button.
4. Use the or
5. Press the More (SKL) button.
6. Press the Select (SKL) button.
7. Press the Format (SKL) button repeatedly to change the format of the displayed
number.
. Press the TALK or SPKR button. The formatted number dials automatically.
NoTE: To dial from cellular line, press Back (Skr), then press Cell (Skr).
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
44

umber

button to display the desired record.
cId n
umber
button to scroll to the desired CID record.
Explanation
long distance code "1 "
+-digit area code
+7-digit telephone number.
-digit area code +
7-digit telephone number.
7-digit telephone number.
b d
efore IalIng
Example
1-17--
17--
-