2. Press the program/flash button until SET CONTRAST shows in the
display.
3. Use the CID VOL(+)/CID VOL(-) to select the desired setting.
4.
NOTE: As you scroll through the contrast settings, the display
contrast changes accordingly.
4. Press the program/flash button to store.
5.
6.
5. Press the *tone/exit button to return to standby mode.
A
NSWERING
1. Make sure the Spacemaker
2. Press the program/flash button until SET ANSWERER shows in the
display.
3. Use the CID VOL(+)/CID VOL(-) to select ON or OFF .
4.
5.
4. Press the program/flash button to store.
6.
5 Press the *tone/exit button to return to standby mode.
NOTE: The displays shows ANS.ON or ANS.OFF to indicate the status
of the answering system.
N
UMBER OF
1. Make sure the Spacemaker
2. Press the program/flash button until RING TO ANSWER shows in the
display.
4.
3. Use the CID VOL(+)/CID VOL(-) to select 3 , 4, 5 or 6 rings before the
answering system answers the call.
5.
4. Press the program/flash button to store.
6.
5. Press the *tone/exit button to return to standby mode.
A
NSWERING
1. Make sure the Spacemaker
2. Press the program/flash button until SECURITY CODE shows in the
display.
3. Use the CID VOL(+)/CID VOL(-) to select the three digits of your
4.
access code.
S
ON/OFF
YSTEM
®
R
INGS
®
S
R
YSTEM
EMOTE
®
phone is OFF (in standby mode).
phone is OFF (in standby mode).
A
S
CCESS
ECURITY
is OFF (in standby mode).
C
ODE
15