Essages Andset Ound Ignals; Handset Sound Signals - GE 28128 Series User Manual

NEw CALL XX
No CALLS
No DATA
oUT of rANGE
PAGING or
PAGING froM
PLEASE rEGISTEr
rEPEAT
SEArCHING
SPEAkEr
UNkNowN CALLEr/ The incoming call is from an area not serviced by Caller ID or
NAME/NUMBEr

HANDSET SoUND SIGNALS

Signal
A long warbling tone (with ringer on)
Three short beeps
One long beep
One short beep (during room monitoring mode)
One short beep (every 7 seconds)
60
XX represents the number of new CID records not reviewed.
Indicates there are no CID records in memory.
No Caller ID information was received.
May indicate handset is too far away from the base or that
the power has been interrupted. Move closer and check
connections.
Someone pressed the PAGE button on the base or INT
button on the handset
Indicates the handset needs to be registered before use.
Repeat call message. Indicates that a new call from the same
number was received more than once.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
the information was not sent.
Meaning
Signals an incoming call
Page signal
Confirmation tone for the
completion of a function
Ring alert tone
Low battery warning