To Stop And Restart The Cd Player; Using The "Seek" Feature (Cd Player) - Ford Econoline/Club Wagon E-150 Owner's Manual

Hide thumbs Also See for Econoline/Club Wagon E-150:
Table of Contents

Advertisement

NOTE: The CD player has heat protection
circuitry to protect the laser diode. If
the temperature of the player reaches
167˚F (75˚C), the heat detection circuit
will shut off the player and "TOO
HOT" will scroll in the display for
approximately five seconds (radio will
resume playing). When the temperature
returns to normal operating range, the
CD player will again be operational.
How to stop and restart the CD player
When a disc is loaded, the unit automatically
enters the play mode and the play indicator a
illuminates. To stop temporarily, press the
"PLAY/STOP" button or the "AM/FM" button.
The stop indicator X in the display illuminates
and operation returns to the radio mode. To
resume CD play, press the "PLAY/STOP"
button once again.
NOTE: If the ignition key is turned OFF
during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.
Using the "SEEK" feature
The "SEEK" feature allows you to quickly find a
particular selection on the disc.
Press the bottom ( b ) half of the "SEEK" button
once to repeat the current playing selection.
Press the top ( a ) half of the "SEEK" button to
advance to the next selection.
Pressing and holding the bottom ( b ) or top ( a )
half of the "SEEK" button will scroll backward
and forward respectively through the tracks.
158

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents