Assembly - Grizzly G4176 Owner's Manual

assembly

you MuSt assemble all guards, fences, and
holdowns before starting your machine or
power feeder. Failure to heed this warning
could result in serious personal injury.
to correctly position this power feeder on your
table top, completely assemble the power feeder
first in the order of a, b and c, as shown in
Figures 6 and 7. Next, refer to base Mounting
on Page 15. With the power feeder unit completely
assembled, it will be easier to locate where on the
table top you will need to drill your base mounting
holes, so you can take advantage of the full range
of power feeder swing and adjustments.
-14-
a
B
Figure 6. stand assembly.
C
Figure 7. assembled unit.
Model G4176 (Mfg. Since 8/97)