[3D Settings] Menu; [3D System Setting]; [Dlp Link]; [3D Sync Setting] - Panasonic PT-DZ870E Operating Instructions Manual

[3D SETTINGS] menu

On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the
sub-menu.
Refer to "Navigating through the menu" (x page 65) for the operation of the menu screen.
f After selecting the item, press asqw to set.

[3D SYSTEM SETTING]

Set a picture display method for use during 3D signal input as necessary for the 3D system in use.
1) Press as to select [3D SYSTEM SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[SINGLE]
[DUAL (LEFT)]
[DUAL (RIGHT)]
Note
f When 2D images are input, 2D images are displayed regardless of [3D SYSTEM SETTING] settings.

[DLP Link]

You can set this function when using the 3D eyewear that supports DLP Link.
1) Press as to select [DLP Link].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f If [DLP Link] is set to [ON], [DYNAMIC IRIS] is fixed to [OFF] while 3D images are displayed.

[3D SYNC SETTING]

Set the way in which the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal will be used.
Attention
f Before connecting external devices to the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal using cables, complete the
[3D SYNC MODE] setting and confirm that the external devices to be connected are turned off.
f Changing [3D SYNC MODE] while the cables are connected may result in malfunctions of the projector or the connected external devices.
1) Press as to select [3D SYNC SETTING].
2) Press the <ENTER> button.
f The precaution message related to [3D SYNC SETTING] is displayed.
3) Press the <ENTER> button.
f The [3D SYNC SETTING] screen is displayed.
4) Press as to select [3D SYNC MODE].
90 - ENGLISH
Chapter 4 Settings — [3D SETTINGS] menu
During 3D signal input, images for the right eye and images for the left eye are alternately displayed
with the frame sequential system.
Only images for the left eye are displayed during 3D signal input.
Only images for the right eye are displayed during 3D signal input.
Enables the DLP Link function.
Disables the DLP Link function.