Panasonic PT-DZ870E Operating Instructions Manual page 132

2) Press the <ENTER> button.
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
4) Press the <ENTER> button.
5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press qw to switch [USER].
7) Press as to select the button item to set.
f When [INPUT SELECT BUTTON] is selected, press the <ENTER> button, and then press as to select the button to set.
[POWER BUTTON]
[INPUT SELECT BUTTON]
[MENU BUTTON]
[LENS BUTTON]
[AUTO SETUP BUTTON]
[SHUTTER BUTTON]
[ON SCREEN BUTTON]
[OTHER BUTTON]
*1 Only for PT-DZ870E
8) Press qw to switch the item.
[ENABLE]
[DISABLE]
f The following items are available only when [RGB1/2 BUTTON] of [INPUT SELECT BUTTON] is selected.
[TOGGLE]
[RGB1]
[RGB2]
[DISABLE]
f When [INPUT SELECT BUTTON] is selected in Step 7), and after the item is switched, press the <MENU> button to return to the
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen.
9) Press as to select [APPLY], and press the <ENTER> button.
f The confirmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f Even when button operation on the remote control is disabled, operation of the <ID SET> button on the remote control is enabled.
132 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
[CONTROL PANEL]
Power standby <v> button, power on <b> button
<VIDEO> button, <RGB1/RGB2> button, or <RGB1/2> button, <DVI-D> button, <HDMI> button,
<DIGITAL LINK> button, and <SDI> button
<MENU> button
<LENS> button
<AUTO SETUP> button
<SHUTTER> button
—
asqw, <ENTER> button
Enables button operations.
Disables button operations.
Switches between RGB1 and RGB2 when the button is operated.
Fixes to RGB1.
Fixes to RGB2.
Disables button operations.
Buttons that can be set
[REMOTE CONTROL]
*1
Lens (<FOCUS>, <ZOOM>, <SHIFT>) button
<ON SCREEN> button
Buttons not listed above