Panasonic PT-DZ870E Operating Instructions Manual page 81

[CORNER CORRECTION]
[CURVED]
[PC-1]
*1
[PC-2]
*1
[PC-3]
*1
*1 Advanced skills are necessary to use a computer to control geometric adjustment. Consult your dealer. Up to three geometric adjustments
performed using the computer can be saved.
Setting [KEYSTONE] or [CURVED]
1) Press as to select [GEOMETRY(2D)].
2) Press qw to select [KEYSTONE] or [CURVED].
3) Press the <ENTER> button.
f The [GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED] screen is displayed.
4) Press as to select the item to adjust.
5) Press qw to adjust.
[LENS THROW RATIO]
Set the throw ratio for the lens used.
[VERTICAL KEYSTONE]
[VERTICAL BALANCE]
Adjust the setting according to the lens shift range in the vertical
direction.
[LENS THROW RATIO]
Set the throw ratio for the lens used.
[VERTICAL KEYSTONE]
[VERTICAL ARC]
Chapter 4 Settings — [POSITION] menu
Adjusts any distortion in the four corners of the projected image.
Adjusts any curved distortion in the projected image.
Uses the computer to perform geometric adjustment.
[KEYSTONE]
[CURVED]
[HORIZONTAL KEYSTONE]
[HORIZONTAL BALANCE]
Adjust the setting according to the lens shift range in the horizontal
direction.
[HORIZONTAL KEYSTONE]
[HORIZONTAL ARC]
ENGLISH - 81