[Input Resolution]; [Clamp Position] - Panasonic PT-DZ870E Operating Instructions Manual

Blanking correction
Top of the screen
Bottom of the
screen
Left side of the
screen
Right side of the
screen

[INPUT RESOLUTION]

You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.
1) Press as to select [INPUT RESOLUTION].
2) Press the <ENTER> button.
f The [INPUT RESOLUTION] screen is displayed.
3) Press as to select [TOTAL DOTS], [DISPLAY DOTS], [TOTAL LINES], or [DISPLAY LINES], and press
qw to adjust each item.
f Values corresponding to the signal being input are displayed automatically for each item. Increase or decrease the displayed values
and adjust to the optimal point viewing the screen when there are vertical stripes or sections are missing from the screen.
Note
f Previously mentioned vertical banding will not occur with all white signal input.
f The image may be disrupted while performing the adjustment, but it is not a malfunction.
f [INPUT RESOLUTION] can be adjusted only when an RGB signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.
f Certain signals may not be adjustable.

[CLAMP POSITION]

You can adjust the optimal point when the black part of the image is blunt or it has turned green.
1) Press as to select [CLAMP POSITION].
2) Press qw to adjust.
Status
The black part is blunt.
The black part is green.
Note
f [CLAMP POSITION] can be adjusted only when a signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal.
f Certain signals may not be adjustable.
Chapter 4 Settings — [ADVANCED MENU] menu
Item Operation
Press the q
button.
[UPPER]
Press the w
button.
Press the w
button.
[LOWER]
Press the q
button.
Press the w
button.
[LEFT]
Press the q
button.
Press the q
button.
[RIGHT]
Press the w
button.
Rough guide for optimal value
The point where bluntness of the black part improves the most is
the optimal value.
The point where the green part becomes black, and the bluntness
has improved is the optimal value.
Adjustment
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves upward.
The blanking zone
moves downward.
The blanking zone
moves to the right.
The blanking zone
moves to the left.
The blanking zone
moves to the right.
The blanking zone
moves to the left.
Range of adjustment
PT-DZ870E: Top to bottom
0 - 599
PT-DW830E: Top to bottom
0 - 399
PT-DX100E: Top to bottom
0 - 383
PT-DZ870E: Left to right
0 - 959
PT-DW830E: Left to right
0 - 639
PT-DX100E: Left to right
0 - 511
Range of adjustment
1 - 255
ENGLISH - 85