[Sdi In] - Panasonic PT-DZ870E Operating Instructions Manual

[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.

[SDI IN]

(Only for PT-DZ870E)
Set to match the signal to input to the <SDI IN> terminal.
Setting [SIGNAL LEVEL]
Select the amplitude of the signal to input.
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SIGNAL LEVEL].
4) Press qw to switch the item.
[64-940]
[4-1019]
Setting [BIT DEPTH]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [BIT DEPTH].
4) Press qw to switch the item.
[AUTO]
[12-bit]
[10-bit]
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [3G-SDI MAPPING].
4) Press qw to switch the item.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f Does not operate during SD-SDI or HD-SDI input.
100 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select when the HDMI terminal output of an external device (such as a blu-ray disc player) is
connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
Select this when the DVI-D terminal output or HDMI terminal output of an external device (such as a
computer) is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
Normally use this setting.
Select when gray is displayed as black.
Automatically select 12 bits or 10 bits.
Fix to 12 bits.
Fix to 10 bits.
Automatically select level A or level B.
Fix to level A.
Fix to level B.