Epson Stylus Office BX610FW Series Fax Manual page 11

5. If you use the document table, you see
this screen after your original is
scanned.
If you need to fax another page, press
u or d to select Yes, open the document
cover, remove your first original, place
your next original, and close the
document cover. Then press OK to fax
the next page. Repeat these steps to fax
any other pages.
If you do not need to fax another page,
press u or d to select No.
Note:
❏ If the fax number is busy or there is some
other connection problem, you see a
redialing information screen and the
product redials the number after one
minute. Wait for the redial, or press
[Redial/Pause] during the redial
countdown to redial immediately.
❏ Documents scanned up to this point will
be transmitted after 20 seconds.
Speed dialing/Group dialing
fax numbers
1. Press Home to select K Fax, and then
press OK.
2. Press [Speed Dial/Group
Dial/Backspace] to select Speed Dial
List or Group Dial List.
3. Press u or d to select entry number
that you want to send, then press OK.
Press OK. You see the sending
information screen.
4. Repeat steps 4 to 5 in the previous
section to fax.
Note:
If you use group dial list, only B&W is
available.
Broadcast sending
Broadcast allows you to easily send the
same fax message to many fax numbers
using speed dial/group dial, or by
entering a phone number. You can send
up to 30 phone numbers.
1. Press Home to select K Fax, and then
press OK.
2. Press x Menu.
3. Press r to select Broadcast Fax, and
then press OK. If you do not need to
enter the phone number directly, go to
Step 6.
4. Press r to add phone numbers using
the numeric keypad.
5. Press OK. If you want to add another
phone number, press d and then repeat
steps 4 to 5.
6. Press [Speed Dial/Group
Dial/Backspace] to select the Speed
Dial List menu. If you do not need to
use speed dial, go to Step 8.
7. Press u or d to select an entry number,
and then press r to add phone
numbers. You see this screen.
Repeat these steps to add another
entry.
Note:
To cancel adding the entry, press l.
8. Press [Speed Dial/Group
Dial/Backspace] to select the Group
Dial List menu. If you do not need to
use group dial, go to Step 10.
9. Press u or d to select an entry number,
and then press r to add phone
numbers. You see this screen.
Repeat these steps to add another
entry.
Faxing Photos or Documents
11