If You Are Out Of The Transmission Range; Restoring Factory Default Settings - Sennheiser EZX 60 Instruction Manual

Instruction for use

Hide thumbs Also See for EZX 60:

Table of Contents

If you are out of the transmission range

Calling is only possible in the Bluetooth transmission range of the mobile

phone or Bluetooth device, respectively. The transmission range largely

depends on environmental conditions such as wall thickness, wall compo-

sition etc. With a free line of sight, the transmission range of most mobile

phones or Bluetooth devices is up to 10 meters.

If the headset leaves the transmission range of the mobile phone or

Bluetooth device:

• The sound quality deteriorates before the connection finally breaks

down.

• Your mobile phone or Bluetooth device displays the loss of connection.

• Please refer to the manual of your mobile phone or Bluetooth device for

information on whether the call is automatically transferred to the

mobile phone or Bluetooth device or requires an acknowledgement to

do so.

The headset will then go into standby mode.

You can restore the following settings to their factory default settings:

• speaker volume

• ring tone volume

• pairing

Set the headset to pairing mode as described under "Establishing Blue-

tooth connections" on page 11.

Press the volume up button

times in quick succession (i.e. press

then

The LED

flashes 4 times, indicating that the reset was successful and

the headset then switches off.

Using the EZX 60

and the volume down button

then

three

then

Table of Contents