Calling - Sennheiser EZX 60 Instruction Manual

Accepting a mobile phone call
Rejecting call
2 x
Making a call
Redialling the last
number dialled*
2 s

Calling

Provided the headset is switched on, paired and within the transmission
range of a mobile phone (see page 12), you can accept and make calls with
the EZX 60.
When you receive a call via your mobile phone and the headset is already
switched on, you hear a ring tone in the headset and the LED
3 times every 4 seconds. If the mobile phone is set to silent alert or
vibrating alert, you will hear no ring tone in the headset.
Press the multi-function button
An ascending confirmation beep is heard in the headset.
Start to talk.
Double-press the multi-function button
A descending confirmation beep is heard in the headset. The ringing
stops. Depending on the settings of the mobile phone or Bluetooth
device, the call is either rejected or transferred to a voice mailbox.
Dial the number on your mobile phone.
If your mobile phone automatically transfers the call audio to the
headset, a beep is heard in the headset. If your mobile phone does not
automatically transfer the call audio to the headset, you have to press
a button on your mobile phone to manually transfer the call audio to
the headset.
Start to talk.
Redialling the last number dialled is only possible with certain mobile
phones or Bluetooth devices. Please refer to the manual of your mobile
phone or Bluetooth device.
Press and hold the multi-function button
A beep is heard in the headset. The last dialled number is redialled.
If redialling has failed (e.g. because there is no last dialled number stored
in the mobile phone, the call is rejected by the other party or the other
party cannot be reached), two descending beeps are heard in the headset.
* This function must be supported by the mobile phone.
Using the EZX 60
.
.
for 1 to 2 seconds.
flashes
15