Muting The Headset's Microphone; Enabling/Disabling Voice Prompts; If You Are Out Of The Bluetooth Transmission Range - Sennheiser Presence User Manual

14 UsInG the heADset

Muting the headset's microphone

Muting the microphone
Press the Volume + and – button.
the voice prompt "Mute on" is announced.

Enabling/disabling voice prompts

6s

If you are out of the Bluetooth transmission range

Calling is only possible in the Bluetooth transmission range of the mobile phone/Bluetooth device. the transmission
range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of
sight, the transmission range of most mobile phones and Bluetooth devices is up to 25 meters.
"...disconnected"
If the headset leaves the transmission range of the
connected Bluetooth device during a call, one of the
following voice prompts is announced in the headset:
• "Phone one disconnected" for the first mobile phone
• "Phone two disconnected" for the second mobile
phone or
• "Dongle disconnected" for the Bluetooth dongle.
Presence Grey Bluetooth headset
"Mute on"
"Voice on" /
"Voice off"
~25 m
Unmuting the microphone
Press the Volume + and – button.
the voice prompt "Mute off" is announced.
In idle mode (no active call or music reproduction):
Press and hold both volume buttons.
the voice prompts are now activated/deactivated and
the voice prompt "Voice on" or "Voice off" is announced
in the headset.
"...connected"
If you re-enter the Bluetooth transmission range
5 minutes, the connection is re-established and the voice
prompt "Phone one connected", "Phone two connected"
or "Dongle connected" is announced in the headset.
If you spend more than 5 minutes
transmission range, the connection breaks down
completely and you have to manually re-establish the
connection.
"Mute off"
5min
within
outside the Bluetooth