Changing The Speaker Volume; Changing The Ring Tone Volume - Sennheiser EZX 60 Instruction Manual

Using the EZX 60
18

Changing the speaker volume

WARNING Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headsets also sound exceptionally good at low
volumes.
Set the volume to a medium level.
You can only adjust the speaker volume during an active call:
To increase the volume step-by-step, press the volume up button
To reduce the volume step-by-step, press the volume down button
To change the volume continuously, press and hold the respective
volume button.
The speaker volume can be adjusted in 8 steps. The volume is factory
preset to a medium level. When the minimum or maximum volume is
reached, a high or low beep is heard in the headset. When you switch
off the headset, the current volume setting is saved.
Depending on your mobile phone you can also change the
speaker volume using your mobile phone (see the manual of
the respective mobile phone).
Changing the ring tone
You can adjust the ring tone volume while the headset is in standby mode
(no active call):
To increase the volume step-by-step, press the Volume up button
To reduce the volume step-by-step, press the Volume down button
To change the volume continuously, press and hold the respective
volume button.
The ring tone volume can be adjusted in 8 steps. The volume is factory
preset to a medium level. When the minimum or maximum volume is
reached, a high or low beep is heard in the headset. When you switch
off the headset, the current volume setting is saved.
* This function must be supported by the mobile phone.
volume*
.
.
.
.