Putting The Ezx 60 Into Operation; Charging The Headset Battery - Sennheiser EZX 60 Instruction Manual

Putting the EZX 60 into operation

10
Putting the EZX 60 into operation

Charging the headset battery

If you charge the battery for the first time, allow charging for at least
2.5 hours without interruption. Later, 2 hours will suffice to fully charge
the battery. The headset cannot be used during the charging process.
To charge the battery in the headset:
WARNING Danger of injury!
Wearing the headset when charging can cause burns and
injuries.
Do not wear the headset when charging.
Take off the headset and switch it off (see page 12).
Connect the charging plug
If you use the optional charging accessories (see "Accessories" on
page 21)*:
EU
UK
US
AU
Connect the USB charging cable to the socket for power supply
Connect the USB plug of the USB charging cable to:
– a USB socket of a computer
– or the USB socket of the USB car charger adapter
Connect the USB car charger adapter to the appropriate power outlet.
During charging, the LED
interrupted. When charging is complete, the LED
2 seconds.
A fully charged battery provides a talk time of up to 7.5 hours or a standby
time of up to 300 hours.
to the socket for power supply
*
2h
lights up blue. All active connections will be
flashes once every
.