Displayed Information - Bang & Olufsen Beo4 User Manual

68
BeoVision Avant video system...
Note: Please refer to the BeoVision Avant
Setting-up guide for information about the
various sockets on the rear panel.
B E O V I S I O N A V A N T

Displayed information...

3 STEREO
Dolby 3 Stereo* indicator
PRO LOGIC
Surround sound* indicator
TIMER
Indicates that a timer recording has been
programmed into the video tape recorder.
Note: TIMER remains on during standby and
blinks if a timer recording is prevented from being
executed.
RECORD
'Recording in progress' indication for the video
tape recorder.
PT (Play Timer)
Indicates that the BeoVision Avant Timer function
for timed playback or standby is switched on.
Please refer to page 58-59 for further
information.
Note: PT remains on during standby.
C L O S E - U P ...
BeoVision Avant display bar – The display bar
gives information about the system and conceals
the buttons for close-up operation on the back.
"TV 12" (Status display)
Status display for the BeoVision Avant. The display
keeps you informed about what the system is
doing or about an on-going operation.
• (Standby indicator)
The red standby indicator lights up when you
switch off the BeoVision Avant.
The system may still be active – for example, if a
recording is in progress (RECORD will then be lit).
Note: The standby indicator blinks to inform you
that either a video tape is being rewound, or to
inform you that you have left a video tape in the
flap door – please refer to page 37.
* Manufactured under license from
Dolby Laboratories Licensing Corporation
Note: Dolby 3 Stereo and the Dolby Pro Logic Surround are
only available in BeoVision Avant models equipped with a
Dolby Pro Logic Surround module. Please contact your Bang &
Olufsen dealer for further information.