Bang & Olufsen Beo4 User Manual page 49

Using Beo4 tracking adjustment directly...
As an easy alternative to the V.Tape
Adjust menu, use the Beo4 tracking
adjustment function: Find TRACKNG in
the Beo4 display by pressing LIST
L
repeatedly, then press
as required.
Selecting sound track during playback
Recordings are always made with both
a Hi-Fi and a linear sound track. During
playback, the video tape recorder
automatically reproduces the Hi-Fi
sound track, unless otherwise
instructed.
If you are playing back a recording of a
dual language programme, you can
select either of the two languages.
Note: If you are playing back a 'worn' Hi-Fi tape,
the Hi-Fi sound may be of a poor quality, you can
then switch to the mono sound track to achieve
an improved quality. You can, though, try the
tracking adjustment function to improve the
sound (see the previous page).
When you use this function, there will
be no menu available on the screen to
guide you.
M
or to adjust
The current sound mode is indicated in the
BeoVision Avant display:
STEREO
MONO
MONO-1
MONO-2
Hi-FI sound track
Linear sound track
Left sound channel
(language 1)
Right sound channel
(language 2)
Alternatively...
Press until TRACKNG* is displayed
Press to adjust the video picture as
required
*Note: In order to display TRACKNG on Beo4 you
must add the function to the Beo4 list of
functions, see Extra functions in Beo4, page 67 for
further instructions.
Press LIST until SOUND* is displayed
Press GO repeatedly to switch
between the various sound tracks
on the tape
*Note: In order to display SOUND on Beo4 you
must add the function to the Beo4 list of
functions, see Extra functions in Beo4, page 67
for further instructions.
49
LIST
then
or
LIST
then
GO