Bang & Olufsen Beo4 User Manual page 21

Volume adjustments and switching off
You turn the volume level up or down
and silence the speakers via the volume
button on Beo4.
To switch off BeoVision Avant, press
the red standby button •.
Turning the BeoVision Avant
When you first switch on the BeoVision
Avant, it will turn towards a viewing
position quite automatically, but you
can turn it to any position you want..
Three positions can be preset in the
system: position 1 (favourite), 2
(secondary), and 0 (neutral).
... D A I L Y O P E R A T I O N S
Indication of volume level
Indication shows that you can turn or are turning
the stand
Refer back to page 18 for information
of how to preset stand positions...
Press to raise the volume
Press to lower the volume
Press to switch to standby
Press until STAND is displayed
Press to turn the system to the left
Press to turn the system to the right
Alternatively,
Key in the position you want
Press to remove STAND from the
display
21
•
LIST
then
s s
or
t t
1
or
2
or
0
EXIT