Adjusting The Picture - Bang & Olufsen Beo4 User Manual

Adjusting the picture

Menu
1 Timer record
2 Timer play
3 TV list
4 Setup
Main menu
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Source
6 Menu
7 Clock
8 V.Tape
The Setup menu
Brilliance Colour Contrast
32 32 44
The Picture menu allows you to adjust Brilliance,
colour, and Contrast. In some instances, a forth
adjustment will be available Tint.
P I C T U R E A N D
The picture levels in the BeoVision
Avant are already set to neutral values
which suit most situations, however, if
you wish, you can adjust the picture to
your liking.
When you have made your picture
adjustments, you must store them in
order to make them a permanent
setting.
If you want your picture adjustments to
be temporary, simply remove the menu
by pressing EXIT. The picture levels will
now be reset to their original settings
when you switch off the BeoVision
Avant.
What's on the Picture menu...
Brilliance... Picture brilliance can be adjusted in
steps of two within a range of 00 to 62; 32 is
the neutral setting.
Colour... Colour intensity can be adjusted in steps
of two within a range of 00 to 62; 32 is the
neutral setting.
Contrast... The contrast level in the picture can
be adjusted in steps of two within a range of 00
to 62; 44 is the neutral setting.
Note: For video sources using the NTSC signal a
fourth option – Tint (colour shade or nuance) will
be available for adjustment.
S O U N D
Call up the main menu
The main menu appears...
Press to call up the Setup menu
if Sat is available, Setup will be
item 5
The Setup menu appears...
Press to select item number 3,
Picture
The Picture menu appears...
Press to adjust the picture as
required
Press to move the cursor from item
to item in the menu
Make the adjustments you find necessary...
Press to store your adjustment as a
permanent setting of the picture
Alternatively,
press EXIT instead of GO if you do
not want to store your adjustment
Press to remove the on-screen menus
33
MENU
then
4
3
or
then
t t
or
s s
GO
then
EXIT