Bang & Olufsen Beo4 User Manual page 46

46
> Special types of recording
Switch signal from an extra video tape recorder,
DVD or CDV player to the TV...
Press until V.TAPE2* is displayed
LIST
then
Pictures from the extra video tape
GO
recorder appear on the TV screen
or
Press to start a DVD or CDV player
DVD
then
Press to prepare BeoVision Avant for
RECORD
recording
then
Press to record
RECORD
Use V TAPE and STOP to pause the recording,
press RECORD to resume recording...
Press e.g. TV or another source
TV
button to stop the recording entirely
*Note: In order to display V.TAPE2 on Beo4, you
must add the functions to the Beo4 list of
functions, see Extra functions in Beo4, page 67 for
further instructions.
Copying video tapes
Via the AV socket on the back of the
BeoVision Avant, you can copy tapes
directly from an extra video tape
recorder, or from a DVD or CDV player
onto a tape in the BeoVision Avant
video tape recorder. Using only Beo4 to
control the process.
Connect the extra video tape recorder
to the AV socket and register it in the
BeoVision Avant Source menu, see
p.50, Extra video equipment, for
further instruction.*
*Note: See p. 12, Expanding your system, Auxiliary
equipment, in the Setting-up guide for
instructions of how to connect extra video
equipment.
While the tape is being copied, you can
watch a TV programme or switch off
the TV. Press V TAPE if you wish to
return to the copying process.