Make Outbound/Inbound Calls To/From Pstn Network; Make Sure Fxo Modules Are Installed; Make Outbound Calls - ATCOM APBX IP02 User Manual

APBX IP02 User Manual

5. Make outbound/inbound calls to/from PSTN network

5.1 Make sure FXO modules are installed

If there are FXO modules installed in your APBX, APBX configures analog trunk automatically when they
are detected.
NOTE: Before using them, please make sure FXO port is connected with PSTN line (InService). The
connection status can be checked in System Status -> Trunk Status

5.2 Make outbound calls

Go to PBX Settings -> Outbound Routes, click
Outbound Route Name
A unique label to help you identify the outbound route.
Dial Pattern
A filter for marching numbers you dial, the call will be forwarded out via Selected Trunks only when it matches the
dial pattern here. In patterns, some characters have special meanings.
X means Any Digits from 0-9
Z means Any Digits from 1-9
N means Any Digits from 2-9
[1234-9] means Any Digits in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
. means one or more digits
Strip: The number of digits that will be stripped from the front of the dialing string before the call is placed via
Selected Trunks.
For example: If set Dial Pattern: 9, Strip: 1, Prepend 123, user need to dial 94567 to dial PSTN number
1234567
27
to add an outbound route.
ATCOM TECHNOLOGY CO., LIMITED