Firmware Upgrade - ATCOM APBX IP02 User Manual

APBX IP02 User Manual
1) General
There are two ways to set Date/Time for APBX:
a. NTP server
Make sure the connection between APBX and NTP server is OK, if the NTP server is located on Internet, the
gateway of WAN should be right set so that APBX can access Internet.
GMT TimeZone is also an important arguments for time setting in this way. Please choose the right Time Zone.
b. Manually
2) Daylight Saving Time
There are two ways to set DST:
a. Automatic
Just making sure GMT Time Zone is right set is OK. There have already DST setting in each Time Zone.
b. Manually
However, the DST in some countries is changing every year. If the DST setting in Time Zone is not exact. Please
set it manually, the format should be: start=start_time;end=end_time;save=offset
The rule for start / end time is: month/mday/wday/hour:min:second
1<= month <=12 , 0< mday <=31 , 0<= wday <7
month/mday/wday means the first wday coming after month/mday
for example:
start=4/1/7/0:0:0;end=10/31/7/0:0:0;save=1 means APBX time from the first Sunday coming after April 1th to the
first Sunday coming after October 31th will be one hour early.

9.3 Firmware Upgrade

There are two ways to upload Kernel / Application for APBX:
44 ATCOM TECHNOLOGY CO., LIMITED