APBX IP01 User Manual
Path
Set the destination for incoming calls. If Extension is set, this option will not take effect.
5. Make outbound / inbound calls to / from PSTN network
5.1 Make sure FXO modules are installed
If there are FXO modules installed in your APBX, APBX configures analog trunk automatically when they are
detected. The module installed in IP01 can be: AX110X
NOTE: Before using them, please make sure FXO port is connected with PSTN line (InService). The
connection status can be checked in System Status -> Trunk Status
5.2 Make outbound calls
Go to PBX Settings -> Outbound Routes, click
Outbound Route Name
A unique label to help you identify the outbound route.
Dial Pattern
A filter for marching numbers you dial, the call will be forwarded out via Selected Trunks only when it matches the
dial pattern here. In patterns, some characters have special meanings.
X means Any Digits from 0-9
24
to add an outbound route.
ATCOM TECHNOLOGY CO., LIMITED