Pluggable Interfaces; Modular Line Cards; Figure 1-11 Modular Line Card; Table 1-4 Cfp Pluggable Interfaces - Cisco ASR 9000 Series Installation Manual

Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router

Pluggable Interfaces

The Cisco ASR 9000 Series 1-Port 100 Gigabit Ethernet line card and Cisco ASR 9000 Series 2-Port
100 Gigabit Ethernet line card support the CFP pluggable interfaces listed in
Table 1-4
Part Number
CFP-100G-LR4
CFP-100G-SR10

Modular Line Cards

There are two types of modular line card. The 80-Gb card has two network processing units and the
160-Gb card has four network processing units. Each version is available in -SE (Service Engine
Optimized) and -TR (Packet Transport Optimized) variants. The two variants are functionally
equivalent, but vary in configuration scale and buffer capacity.
Figure 1-11
adapter installed in the lower bay.
Figure 1-11
The modular line card provides two bays that support the following Modular Port Adapters (MPAs):
•
•
•
•
•
•
OL-17500-08
CFP Pluggable Interfaces
100 Gigabit Ethernet CFP Optics
100 Gigabit Ethernet long-reach over 4
WDM lanes (LR4) optics (single-mode fiber)
100 Gigabit Ethernet over 10 short-reach
optical lanes (SR10) optics (multimode fiber)
shows the front panel of the modular line card with a 20-port Gigabit Ethernet modular port
Modular Line Card
20-Port Gigabit Ethernet Modular Port Adapter
2-Port 10-Gigabit Ethernet Modular Port Adapter
4-Port 10-Gigabit Ethernet Modular Port Adapter
8-Port 10-Gigabit Ethernet Modular Port Adapter
2-Port 40 Gigabit Ethernet Modular Port Adapter
1-Port 40 Gigabit Ethernet Modular Port Adapter
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
Modular Line Cards
Table 1-4.
Maximum Distance
10 km
100 m
1-29