Cisco 7925G Deployment Manual page 58

Out of Range Alert
Scan Mode
Restrict Data Rates
Power Off When Charging
Cisco Discover Protocol (CDP)
Advertise G.722 Codec
Home Screen
FIPS Mode
Auto Line Select
Bluetooth
File System Verification
Minimum Ring Volume
Bar Code Symbology Group
Scanner Commands
Application Button
With Cisco Unified Communications Manager Express, the thumbButton1 command can tie the application button to a
specific line.
For example, if line 2 is an intercom line tied to a multicast paging group, then this can be configured to achieve Push To Talk.
Enable individual phone configuration files with the following commands.
telephony-service
cnf-file perphone
create cnf-files
For more information on these features, see the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
Administration Guide or the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Release Notes.
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_maintenance_guides_list.html
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_notes_list.html
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
outOfRangeAlert
scanningMode
restrictDataRates
powerOffWhenCharging
cdpEnable
g722CodecSupport
homeScreen
fipsMode
autoSelectLineEnable
bluetooth
fileSystemVerificationEnable
minimumRingVolume
barCodeSymbologyGroup
scannerCommands
thumbButton1
0 = Disabled; 1 = Beep Once; <2-4> = Beep every
<10,30,60> seconds
0 = Auto; 1 = Single AP; 2 = Continuous
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
0 = Use System Default; 1 = Disabled; 2 = Enabled
0 = Main Phone Screen; 1 = Line View
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
0 = Disabled; 1 = Enabled
0 = Silent; <1-7> = Different Volume Levels
0 = Basic; 1 = Extended
(e.g. 414b5a01)
414b5a01enables UPC>EAN13 conversion
4170800005 will turn off the scanner after 5
seconds if no barcode is scanned
PTTH<1-6>
58