Docking - Cisco 7925G Deployment Manual

1. Connect the power supply to the Cisco Unified Wireless IP Phone 7925G Desktop Charger.
2. Insert the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G into the desktop charger.
3. Power on the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G.
4. Press and hold the Control button on the right side of the desktop charger for 5 seconds.
The Power/Bluetooth status LED begins to flash, which indicates that the desktop charger is now in pairing mode.
5. From the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G, choose Settings > Phone Settings >
Bluetooth.
6. If Bluetooth is Disabled, press Select, select Enable, and then press Save.
7. Select Device List, then press Scan, which will then list the available devices. To rescan, press Rescan.
8. Select Cisco Dock 7900 and press Pair.
9. If prompted, enter 0000 for the passkey and press Select or choose Options > OK, and the pairing will be completed.
10. Press the End button on the phone to return to the main screen.
If paired successfully, then the Power/Bluetooth status LED will turn to solid blue.

Docking

After inserting the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G into the Cisco Unified Wireless IP
Phone7925G Desktop Charger, the Power/Bluetooth status LED will being to flash blue to indicate a Bluetooth connection
attempt is being made.
After the Bluetooth connection is established, the Power/Bluetooth status LED will turn to solid blue.
If currently on a call when the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G is docked, there will be a small
delay to switch the audio path to the desktop charger's Bluetooth speakerphone while the Bluetooth connection completes. The
call will continue using the Cisco Unified Wireless IP Phone 7925G Desktop Charger's Bluetooth speakerphone after the
Bluetooth connection is made.
When the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G is undocked, the Bluetooth connection will be
disconnected and the phone will return to the previously used audio path (e.g. handset or speakerphone mode).
See the following links for more information on the Cisco Unified Wireless IP Phone 7925G Desktop Charger.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/8_0_1/english/user_guide/P256_BK_EBE22
FA_00_wireless-ip-phones-user-guide_chapter_01001.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/8_0/english/quick_start/7925Ch_qs.pdf
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
123